Details
Model 98 Cast Iron Series
Features
- Non-clogging engineered plastic vortex impeller design
- Corrosion resistant powder coated epoxy finish
- Durable cast construction. Cast switch case, motor, pump housing and base. No sheet metal parts to rust or corrode
- Castings - All cast iron class 25-30 25000# tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float operated submersible (NEMA 6) 2-pole mechanical switch
- Motor - Permanent split capacitor, 60 Hz, 1725 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protection
- Bearings - Upper & lower oil fed cast iron
- Carbon and ceramic shaft seal
- Entire unit pressure tested after assembly
- Watertight neoprene “” ring between motor and pump housing
- Maximum temperature for effluent or dewatering 130°F - 54°C
- Passes ½ inch spherical solids
- No screens to clog
- Standard cord length 15 ft. (UL Listed)
- 1½” NPT Discharge (1½” X 2” PVC Adapter included with BN & BE Models)
- On point - 9½”
- Off point - 3”
- Major width - 10 1/8”
- Height - 12”
The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with nonautomatic pumps.
Specifications:
- Material: Cast Iron
- Voltage: 115 V
- Phase: 1
- Mode: Non-Automatic
- Current: 9.4 A
- Control Selection (Simplex): 2,3
- Control Selections (Duplex): 4
- On Point: 9 1/2 inches
- Off Point: 3 inches
- Width: 10 1/8 inches
- Height: 12 inches
Product Literature
