Details
Model 53 Cast Iron Series
Features
- Non-Clogging vortex impeller
- Float operated, submersible (NEMA 6) 2-pole mechanical switch & variable level long cycle systems available
- UL Listed 3-wire cord plug; 9 ft. standard for automatic, 15 ft. standard for nonautomatic
- Corrosion resistant powder coated epoxy finish
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard and handle
- No screens to clog
- Watertight neoprene
- Ring between motor and pump housing
- Solid buoyant polypropylene float
- Motor - 60 Hz, 1550 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure tested after assembly
- Carbon and ceramic shaft seal
- Maximum temperature for effluent or dewatering - 130°F (54°C)
- Passes 1/2" inch spherical solids
- 1 1/2" NPT Discharge
- On point - 7 1/4"
- Off point - 3"
- Major width - 10 3/32"
- Height - 10 1/16"
- Cast iron switch case, motor & pump housing
- Glass-filled polypropylene base
- Engineered, glass-filled, plastic impeller with metal insert
- Stainless steel guard & handle
- Bearing - lower & upper oil fed cast iron
Note: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with nonautomatic pumps.
Specifications:
- Material: Cast Iron
- Voltage: 115 V
- Phase: 1
- Mode: Automatic
- Current: 9.7 A
- Control Selection (Simplex): 2
- Listing (CSA): Yes
- Listing (ULL): Yes
- Thread Size: 1 1/2 inches
- On Point: 7 1/4 inches
- Off Point: 3 inches
Product Literature
