Zoeller BN98 Effluent Pump

PRODUCT DETAILS
Model 98 Cast Iron Series

Features

• Non-clogging engineered plastic vortex impeller design
• Corrosion resistant powder coated epoxy finish
• Durable cast construction. Cast switch case, motor, pump housing and base. No sheet metal parts to rust or corrode
• Castings - All cast iron class 25-30 25000# tensile strength
• Stainless steel screws, guard, handle, arm and seal assembly
• Float operated submersible (NEMA 6) 2-pole mechanical switch
• Motor - Permanent split capacitor, 60 Hz, 1725 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protection
• Bearings - Upper & lower oil fed cast iron
• Carbon and ceramic shaft seal
• Entire unit pressure tested after assembly
• Watertight neoprene ring between motor and pump housing
• Maximum temperature for effluent or dewatering 130°F - 54°C
• Passes 1/2 inch spherical solids
• No screens to clog
• Standard cord length 15 ft. (UL Listed)
• 1 1/2" NPT Discharge (11/2" X 2" PVC Adapter included with BN & BE Models)
• On point - 9 1/2"
• Off point - 3”
• Major width - 10 1/8"
• Height - 12"

The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with nonautomatic pumps.



PRODUCT WARRANTY INFORMATION