Zoeller BN53 Effluent Pump

PRODUCT DETAILS
Model 53 Cast Iron Series

Features

• Non-Clogging vortex impeller
• Float operated, submersible (NEMA 6) 2-pole mechanical switch & variable level long cycle systems available
• UL Listed 3-wire cord plug; 9 ft. standard for automatic, 15 ft. standard for nonautomatic
• Corrosion resistant powder coated epoxy finish
• No sheet metal parts to rust or corrode
• Stainless steel screws, switch arm, guard and handle
• No screens to clog
• Watertight neoprene
• Ring between motor and pump housing
• Solid buoyant polypropylene float
• Motor - 60 Hz, 1550 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected
• Upper and lower sleeve bearings running in bath of oil
• Entire unit pressure tested after assembly
• Carbon and ceramic shaft seal
• Maximum temperature for effluent or dewatering - 130°F (54°C)
• Passes 1/2" inch spherical solids
• 1 1/2" NPT Discharge
• On point - 7 1/4"
• Off point - 3"
• Major width - 10 3/32"
• Height - 10 1/16"
• Cast iron switch case, motor & pump housing
• Glass-filled polypropylene base
• Engineered, glass-filled, plastic impeller with metal insert
• Stainless steel guard & handle
• Bearing - lower & upper oil fed cast iron

Note: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with nonautomatic pumps.



PRODUCT WARRANTY INFORMATION